The MD-18B7 motion detector is designed to control lighting or other electrical devices supplied with 230V AC.

When motion is detected in the detector's field of view, power is supplied to the receiver for the time specified by the built-in time delay setting.

In addition, the device is equipped with a light intensity sensor and a regulator of the highest light intensity, at which the detector will work.

A switch built into the detector, apart from the PIR mode, in which the detector controls the power supply to the receiver, allows you to activate or disconnect the controlled device - bypassing the detector state.

The maximum load of the relay used in the detector is 2000W for a resistive load or 1000W for an inductive load.

Seade on mõeldud paigaldamiseks ripplagedesse.